Replacing The Ink Cartridge On The IJ-35, IJ-40, IJ-45, IJ-50, IJ-60, WJ-60, WJ65, WJ-90, WJ95, WJ110

To replace the Ink Cartridge follow these steps:
Before beginning, check the screen to make sure the machine is in Ready Mode.

1. From the Ready Mode press the Menu key.
2. Using the Up and Down keys or numeric keypad select CARTRIDGE and press to confirm.

3. Select the REMOVE option from the Cartridge Menu.

4. Press to confirm. After a short while the following screen will be displayed:

5. Open the machine top cover.

6. Press down on the depressed circle of the Ink Cartridge in order to remove it. The Ink Cartridge will pop forward for removal.

7. Carefully remove the used Ink Cartridge and discard.

8. Remove the new Ink Cartridge from its packaging and carefully remove the tape seals. Do not touch or remove the copper strips on the Ink Cartridge.

9. Place the new cartridge into its holder by carefully pushing down on the depressed circle on top of the cartridge with your index finger.

10. Push down on the rear of the Ink Cartridge to lock it into position.

11. Close the machine top cover and press OK.

12. After a short delay the prompt to make a Test Print will be displayed.

13. Perform a Test Print. For instructions click here.